| > To Drawing > View Movie |
XFOX
XFOX brackets primarily intended for the support of
horizontally running profiles and can also be used in the vertical plane
for the support of heavy cladding elements, e.g. natural stone, bricks, etc.
Due to the special geometry of these brackets, high load-bearing capabilities
capabilities can be achieved using relatively small support elements.
Technical properties
XFOX brackets are made of aluminium EN AW-6060 T66, former designation
AlMgSi 0,5 F22, and comply with BS EN 755 as well as the common regulations
for hung ventilated facades in
dimensions of 70 – 180mm.
XFOX brackets are available in different lengths, medium and large.
XFOX medium and large brackets assembled can be of both Fixed point and
Flexible point positions, reducing the risk of installation errors.
Using XFOX brackets in combination with EUROFOX
isolators, significantly reduces the effect of thermal bridging.
XFOX functions reduce installation time
The elongated holes used to fix the XFOX bracket to the exterior wall and
the round and elongated holes used to fix profiles to the brackets are
prefabricated. Particularly helpful for the installation of the profiles is the
integrated, continuous fixing clip of every XFOX bracket, this allows
40mm profile adjustment on each XFOX bracket.
These product characteristics ensure that the installation time for the
substructure is significantly reduced, the costs of the entire facade are
reduced. Which in turn results in reduced facade construction costs overall.